Dependent on an thought by Tina Zegg and Carlo Cerlati, foremost figures in luxurious watchmaking based in Monaco, and backed by replica hublot Chairman Jean-Claude Biver as well as company's CEO, Ricardo Guadalupe, this can be the 1st at any time ultra-technical diving view to become adorned with denim. And we've not settled for virtually any aged denim! The dial and strap are made by an Italian denim company who supplies the world's biggest luxurious and trend names. The "Oceanographic 4000 Jeans" is a exclusive minimal edition of just 21 numbered replica watches available solely from Zegg Cerlati boutiques, at Area du On line casino in Monte-Carlo, Ischgl in Austria and Samnaun in Switzerland.
The launch of the ultra-technical view, which combines vogue while using the top quality craftsmanship of the Haute Horlogerie timepiece, befell about the 18th February 2013 in the Wellness Resort Chasa Montana in Samnaun from the coronary heart from the Swiss Alps (Zegg Hotels Suppliers), and was attended because of the German Double Olympic and Globe snowboarding winner, Maria Höfl- Riesch, a replica hublot ambassador since 2011. She was joined by Jean-Claude Biver, Chairman of replica hublot , and Ricardo Guadalupe, CEO of replica hublot , who designed the trip, and Tina Zegg and Carlo Cerlati, representing Zegg Cerlati.
A perfect fusion of technologies developed for the extremes found at depths of 4,000 metres, this exclusive version observe, designed to push the boundaries of what is possible while retaining echoes of high manner, with its carbon case, dial designed from genuine pressed denim wrapped in epoxy and strap featuring denim stitched onto black rubber, has summer written all over it. A real instrument with efficiency built into its ergonomics, this look at has been conceived and designed to test the limits of rationality.
It has taken 18 months of research, development and testing to present the Oceanographic 4000, a check out which can be worn on dives to depths of 4,000 metres, under extreme pressure - an exceptional technological achievement.
Almost all the features of your Oceanographic 4000 are exceptional, in terms of design, development and manufacturing. For being described as a "montre de plongee" (diver's observe), resistant to the pressure exerted within the record depth of 4,000 metres, the look at had to meet the exacting specifications in the international standards of Swiss watchmaking (NIHS). Starting with its seal, tested by replica hublot in a Roxer tank, submerged and pressurised to the equivalent of 5,000 metres. To ensure the replica watch is water resistant and can withstand this pressure, the synthetic sapphire crystal is 6. 5 mm thick.
This is thicker than normal, but is reasonable for this level of resistance. The case back is screw-down, essential for reaching such depths. It is built of grade 2 titanium, an extremely strong stainless material.
The chunky, 48 mm diameter case is built from carbon fibre designed and produced entirely by replica hublot .
In terms of brightness, the time and elapsed time measured through the flange must be legible from a distance of 25 cm while in the dark. To meet this requirement, the dial, the flange as well as hands on the Oceanographic 4000 have been optimised to have a larger surface area treated with SuperLuminova™, a luminescent material that emits a grey colour.
The display principle has been designed as safe as possible, using an internal rotating flange which is unidirectional and rack-driven, with a dive time indicator. The dive time indicator is placed as close as possible to the dial to minimise the risk of inadvertently altering the dive time. It also makes the dive time easier to read. In accordance with the standard, the Oceanographic 4000 has a minute scale on which the five-minute periods are clearly highlighted.
The enjoy is fitted with two screw-down crowns (a protective measure that helps ensure water resistance by compression of an O-ring seal). The flange crown which sets the dive time is placed with the 2 o'clock position for easy access and more comfortable use. It is unidirectional, again for safety reasons, with a bayonet fitting, and protected by an oversized crown guard, for extra safety and easy operation when handling diving equipment. The second crown, for winding and setting the time and date, is positioned at 4 o'clock to avoid obstruction.
Finally, the Oceanographic 4000 has a helium valve, a feature essential to any diving look at capable of descending to great depths. An essential feature when the replica watch is used in diving chambers, the helium valve allows gases that have infiltrated the view during the descent to safely escape during the ascent. The valve fitted to the Oceanographic 4000 is produced of stainless steel, positioned at 10 o'clock, visible from the left-hand side lug.
The replica watch is supplied with two straps: The "City" strap, in denim stitched onto black rubber, and the "Diver" strap, longer than a standard strap, which has been developed to become worn over a diving suit up to 8 mm thick. Both feature ardillon buckles. This type of fastening is more secure than a folding clasp for this type of use, and is also easier to handle and close when using gloves. Note that the design of the buckle is original (because the use of a tongue is rare while in the normal replica hublot collections) and that its method of attachment to the case is even more so with two small push buttons built into each end with the case to allow the strap being changed instantly without the use of a screwdriver.